Easy Puff Metallic Heat Transfer Vinyl

Puff is an exciting New Concept in HTV!

It's an expanding, polyurethane based foaming vinyl. Prior to the transfer process it looks like regular heat transfer vinyl. During the transfer process its specialty unfolds. IT EXPANDS and results in a very special Puffy surface effect. There is slight pulling up of the fabric that increases the puffy look and feel of the finished design. It is suitable for cotton, polyester, and blended textiles. DO NOT use on nylon or other coated textiles. For best results a heat press must be used. Peel Hot. Sold in 20" roll widths.

*****DIRECTIONS FOR METALLIC PUFF (ONLY)  READ ****

Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press
application process. After the first press, the carrier must be peeled hot and the design
should be covered with a cover sheet, then pressed a second time to activate the puff effect.
Because achieving proper pressure is key for activating the “puff” effect, it is not
recommended to apply this material with a home iron.

Laundering

• Wait 24 hours before first wash
• Machine wash cold
• Use mild detergent
• Do not bleach or dry clean
• Do not use fabric softener
• Tumble dry on low setting
• Wash inside-out for best results

‍